When you move into a new-to-you home, the previous homeowners might have had different decorating tastes than you. If you just plunked down a bunch of money for your new home, you might not have room in your budget for a complete remodel. Luckily, with a little elbow grease and a few tools, you can paint over certain materials yourself. Use these tips to prepare these textured surfaces:
Brick: Take a look at the brick surface to determine if you need to repair any small cracks with acrylic caulk. Thoroughly clean the brick with a wire brush and soapy water. Avoid using acidic cleaners, as they will affect the final paint job. Let it dry. Use a roller or paintbrush to apply a latex primer to the brick. Push the paint into any tiny crevices or cracks, and apply a second coat if needed.
Stone: Wash the stone surface with vinegar and a soft-bristled brush. Rinse with fresh water and allow it to dry. Use a spray bottle to spray a light mist of water over the area you want to paint. Stone is porous, and the water will seep into the pores and prevent the paint from soaking in too deeply. Prime the surface with a thick roller, making sure to paint over the mortar lines. After the primer dries, paint the finish coat. You should only need one or two coats, but make sure to get into the nooks and crannies.
Wood: With wood paneling, use 120-grit sandpaper to sand the walls thoroughly and remove any gloss. Take a wet cloth and wipe away any dust. Allow the wall to dry. Use a putty knife and apply a thin layer of drywall joint compound to any grooves. After the compound dries, sand the area, wipe with a cloth, and allow it to dry. Paint the oil-based primer over the wall. Once dry, use a roller or brush to paint the wall with latex paint. Let it dry, and apply another coat if needed.
Sources: Homeguides.sfgate.com, Architectual Digest
We are ready to help you find the best possible mortgage solution for your situation. Contact Sheila Siegel at Synergy Financial Group today.